Boom Details
New – BIK Form-Crane Series FC-110 – PM 100028SP + 6-extn Jib Knuckle Boom
- Folding Hyd 8 ext Knuckle Boom with Detachable 6 ext jib
- 110’ Horizontal Reach – Including (w) manual pull-out extension in jib to 122’ horizontal reach (134’ vertical)
- Main Boom Horizontal Capacity:
- 36,800 lb @ 16’
- 20,000 lb @ 23’
- 16,000 lb @ 33’
- 11,000 lb @ 47’
- 7,200 lb @ 67’
- Jib Horizontal Capacity:
- 3,200 lb @ 76’
- 2,600 lb @ 87’
- 2,200 lb @ 100’
- 2,000 lb @ 104’
- 1,600 lb @ 110’
- PM Power-Link connections at Main, Knuckle & Jib Cylinders, Dual Planetary Gear Motors & Continuous Boom Rotation
- Double pilot operated on slewing and pilot operated check valves on all cylinders, Extra function plumbed to boom tip w/Hyd rotator & T-hook
- 180 degree flip-up Hydraulic Extra Wide Main outriggers at pedestal – 28’ – 7” span – 360 degree full load chart stability
- Hydraulic Oil Cooler, high pressure return filter and min. 120 –gallon hyd aluminum oil tank with gate valves mounted at front under deck
- 7 – Section DANFOSS Proportional Control Valve at Top-Seat with Ladder Access – & SCANRECO Proportional Radio Remote Control
- PM – Power Tronic onboard load & function monitoring system, Digital Load Indicator at top seat & remote, electric/hyd overload protection
- Radio Remote Control includes: 2-batteries, in-cab charger, and back-up cord – 5 level turtle (micro) slow down mode
- Lifting winch on Main boom plumbed to the end of jib with proper load hook & down weights
- Warranty: 1-Yr. part & labour on entire boom, 3-Yr. on Structural Components by PM – 24/7 Crane-Tech Support by BIK
- Installed END OF FRAME, with integral sub-frame, 3/8” front and centre -½” sheer plating at crane for maximized torsion strength
Deck Details
New – Low Profile 22’ 6” x 102” Flat Deck:
- Steel headboard w/ 4 Side Wrap Winches
- Steel Checker plate Floor
- Winch bar and holder
- Integral 6” sub-frame and extension at rear as torque box for boom with all proper engineered sheer platting
- X-braces & support
- 2-access Ladders at front
- Removable side rails on both sides
- Reflectors
- Conspicuity tape
- Mud-flaps
- 8-Sliding under deck winch straps
Truck Details
New – 2024 Peterbilt 567 T/A Steer – Tridrive (5 Axles total):
- 109,000 lb GVWR
- Cummins Diesel 15L – 565 hp / 2,050 ft/lb torque
- Engine Brake
- Eaton 18 spd Automated Trans.
- Truck cab white
- (2) x 20,000 LB front steer axles on Air Ride with 425 / 65R22.5 tires
- 69,000 LB Tridrive Rears on Hendrickson Primax Air Ride Susp. With 54” spread between drives
- Double Frame
- Polished ALCOA Aluminum Wheels front and outer rear
- Polished dual Vertical Exhaust pipes
- Chrome Grille & Bumper
- 80 gallon alum fuel tank
- Loaded with Options Including: A/C, Tilt/Telescopic steering, high level Interior, AM/FM stereo Bluetooth, air driver’s seat, fixed passenger seat, cruise, htd mirrors, exterior S/S sun visor, 6 wheel lock-ups, power windows/locks, Air ride cab, dual roof mounted strobe lights, trailer air tow package, etc…
Included Are:
- Auxiliary Extra-Wide hydraulic outriggers 25’ spread front mounted for 360 degree stability
- 1” Drawplate Plate at rear of truck frame
- (1) – Aluminum locking checker plate toolbox installed
- (4) Aluminum stabilizer pads – with holders (4 pcs).
